Bеѕt Sеllеr Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in Module
Review Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in Module
So you can check out the other reviews Lоwеѕt Prісе Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in Module at Amazon.com
only with $73.34
| Brand | Garosa |
| Power Source | Battery Powered |
| Item Weight | 0.01 Kilograms |
| Item Dimensions LxWxH | 3.15 x 2.76 x 2.36 inches |
- High Performance: This electronic load tester uses original IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can sure the stability for a long time use, power redundancy is no less than 50% (25).
- Classical Digital Tube Display: This electronic load tester uses classical digital tube display, which is intuitive and durable, compared to LCD, it is more resistant to high temperature.
- Display Voltage and Current: This electronic load tester can display voltage and current when discharging constant current, visually reflecting the discharge conditions.
- Separated Wiring Connectors: Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.
- Application: 100% power burn-in in factory, This electronic load tester is suitable for assembly of power adapter fully-automatic burn-in cabinet.
Product Description
Electronic Load Tester Load Battery Tester Constant Current Electronic Discharge Load Module Electric Discharge Monitor Discharge Board
This electronic load tester uses original IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can sure the stability for a long time use, power redundancy is no less than 50% (25).
This electronic load tester uses classical digital tube display, which is intuitive and durable, compared to LCD, it is more resistant to high temperature.
This electronic load tester can display voltage and current when discharging constant current, visually reflecting the discharge conditions.
Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.
100% power burn-in in factory, This electronic load tester is suitable for assembly of power adapter fully-automatic burn-in cabinet.
Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in Module
 |
 |
 |
|---|---|---|
Specifications:Power Supply Voltage: DC12V(±5%) (equipment supply voltage) Maximum Load Voltage: 100V Constant Current Discharge Adjusting Range: 0-20A Work Mode: Constant current mode (CC) Maximum Discharge Current Error: 0.7%-0.01A Maximum Discharge Power: 250W Size: 13*9*11.5cm/5.1*3.5*4.5in Weight: 879g(approx.) | Instruction:1. Connect to 12V power supply then power on to electronic load mode. Make sure it is at stop condition (knob clockwise is minimum) then connect the tested power supply to the input power port, pay attention to the polarity. 2. Rotate knob to set constant current. | Details:Package Includes: 1 x Electronic Load Note: 1. Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 250W. 2. Power and voltage led dosent work fan constantly on under no load. Will not put load on battery to be tested, will not display voltage sense leads connected |
Specifications for this item
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in ModuleThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 80% fоr реорlе whо buу Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in Module рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "Bеѕt Sеllеr Electronic Load Tester, DC12V 0-20A 250W Battery Capacity Current Tester Discharge Monitor Module for Testing Discharge Board Burn-in Module"
Post a Comment